Should I Use Riser Pads On My Skateboard

Davis Torgerson

Should I Use Riser Pads On My Skateboard

If you’re a skateboarder, you need to have riser pads on your boards. Riser pads protect your deck and wheels from getting blocked or damaged in any way.

You can find these pads at most sporting goods stores or online retailers like Amazon; they’re quite affordable too. Make sure that the pad is wide enough for your board – it should be at least 2 inches wider than the width of your deck (or 1 inch wider if it’s made out of plastic).

Don’t forget to put them on before taking your board outside.

Should I Use Riser Pads On My Skateboard?

Skateboarding can be a lot of fun, but it’s not always safe. To prevent wheel bite, you need riser pads. Riser pads keep your deck and wheels from getting blocked, which prevents accidents and injuries.

You don’t have to spend a lot of money on riser pads – they’re available at most stores for under $10. Make sure to get the right size pad for your board; too large or small could result in an accident or injury.

Skateboarders need riser pads to prevent wheel bite

Riser pads are essential for skateboarders to avoid wheel bite. They can be easily purchased at most sporting goods stores and make a big difference in your skating experience.

Depending on the size of your board, you may need one or two riser pads per deck. If you’re not sure if you need them, try out a few different styles before making a purchase decision.

Be aware that some boards do not come with riser pads and require users to install them themselves.

Riser pads help keep your board from coming to a full stop before you realize it

Pads can help to keep your board from coming to a full stop before you realize it, keeping you safer and more in control on the skating surface. Choose a pad that is comfortable for both your feet and your skateboard; too much pressure may cause damage or discomfort.

Pad installation is simple – just peel and stick. \\ Make sure that the pads are level with the deck of your skateboard before applying them; otherwise, they could cause sliding problems down the road. Test out the pads by placing them underneath your board before taking it outside for a spin – if everything goes according to plan, you’re good to go.

Riser pads protect your deck and wheels from getting blocked

Riser pads can protect your deck and wheels from getting blocked, so you’ll have a smooth ride every time. They’re also useful if you live in an area with snow or ice, as they prevent your board from becoming stuck.

You can buy riser pads separately or in packs that include different sizes for different skateboards and decks. Make sure to measure the length of your deck before buying a set of risers, as some models come in two pieces that need to be connected together at the middle point.

When installing risers, make sure they are placed slightly below the surface of the deck; otherwise water will seep through them and damage your board.

Do skaters use riser pads?

. Skaters use riser pads to help them keep their balance while they’re skating. Riser pads are made of a soft, thin material and sit between the skater’s shoes and the floor.

They help to distribute your weight evenly so that you can move more easily on the ice. Riser pads are often used by skaters when they want to avoid getting their wheels stuck in the ground.

Riser pads come in different sizes, so you can find one that is perfect for your skating needs. You can use them with or without wheels attached to the board. Some people prefer not to use risers when skating on public streets, because it makes it easier for other pedestrians and cyclists to cross the street safely.

Why do skaters use risers?

Risers are pieces of metal or plastic that help skaters stay on the ice. They come in different shapes and sizes, but their main function is to keep the skater’s feet off the ground.

  • Risers are boards or pieces of wood that are put underneath a skateboard deck to help it absorb shocks and vibrations. Skaters use risers in order to protect their decks from shock, increase the distance between their wheels and the board itself, and change the angle at which trucks touch the ground.
  • There are so-called angled risers pads made specifically for skating on slopes. They have an angled design which helps reduce friction when you’re moving across slippery surfaces.
  • When skaters install risers under their decks, they need to make sure that they get them at the right height according to their personal preferences and skateboarding skills.

You can also find adjustable riser pads which let you fine-tune your stance easily by changing the angle of contact with the ground.

Do skateboard risers matter?

Risers can help prevent wheel bite and pressure cracks in your deck while skating. They also provide added stability when skating, preventing you from falling down or injuring yourself.

Choose risers that fit your skateboard well to avoid any problems or discomfort during use. Finally, make sure to keep an eye out for recalls if you’re concerned about safety.

How do I know if my skateboard needs risers?

If you’re a regular skateboarder, you may have noticed that your board starts to jump around more when you hit a bump in the pavement. This is often caused by risers – metal bars that elevate the deck of your skateboard off the ground.

If your board doesn’t have risers, it will start to sink into the cracks in the pavement and cause more jumps.

Check Your Wheel Size

Before you buy risers, it is important to first measure the distance between the bottom of your deck and the ground.

This will help determine if you need a specific size riser.

Measure The Distance Between The Bottom Of Your Deck And The Ground

Once you know your wheel size, use this information to compare it to the recommended riser height on your skateboard.

If you find that you need a higher or lower risers, then visit a local skate shop and purchase them accordingly.

Compare That Number To The Recommended Riser Height On Your Skateboard

If all of these numbers match up, then there is no need for any additional risers since they would only add unnecessary weight and complexity to your board setup.

However, if one number is significantly different from the others, then it may be necessary to adjust your settings in order to compensate for that difference (see below).

Do riser pads give more pop?

Raiser pads can give your board a bit more pop and increase the distance between tail and surface, potentially resulting in more pops from your board. If you’re looking to add some extra excitement to your skating, riser pads might be for you.

The technique benefits of using riser pads may outweigh automatically giving them when learning how to skate on a rollerbladeboard or longboard. Risers can also make boards easier to control at high speeds- especially if you’re new to this type of skating.

How do risers affect skateboard?

Risers are pieces of metal that attach your skateboard to the ground. They help keep you stable as you ride, and they also affect how your board moves on the ground.

Adding risers to your skateboard can increase the height of the deck.

This will make it easier to ollie and also produce higher jumps. A taller deck also has a steeper tail which makes for more impressive ollies.

What do angled riser pads do?

Adjusting the baseplate angles on your truck will help to keep it from leaning and turning in an undesirable manner. Trucks with wedge and dewedge riser pads have a more stable ride, making them ideal for high-traffic areas or long hauls.

Knowing how to adjust your riser pads can make all the difference when getting started with trucking.

How do you stop your skateboard from vibrating?

If your skateboard is vibrating excessively, one potential solution is to check the shock pads. Adjusting the trucks’ height can help reduce vibration as well, while aligning the wheels with the board may also alleviate it.

Tightening screws and adjusting hardware could make a noticeable difference in how much noise or vibration your skateboard produces. Finally, be sure to properly orient and secure your wheels on the deck of your board before hitting the pavement.

What is a good Ollie height?

To start, you’ll want to find an ollie height that’s comfortable for you and safe to practice at. Work on your balance and technique first, then try adding other tricks once you can ollie safely over 2 feet tall.

Once you’ve mastered the basics, explore more advanced ollies.

To Recap

There’s no right or wrong answer when it comes to using risers pads on a skateboard, but they can help improve your overall experience. Risers pads are especially helpful if you’re new to skating and aren’t used to balancing on the board yet.

Experiment with different pad sizes and thicknesses until you find something that works best for you.

Photo of author

Davis Torgerson

I am a professional skateboarder who has been involved in the skateboarding industry for over 10 years. I have had the opportunity to travel across the world and compete in various competitions. I live in New York City and work as a professional skateboarder. I also work as an assistant editor at a company called Skateboard Mag, where I contribute to articles about street skating, traveling, and other related topics. I have always been passionate about skateboarding and writing. I am currently working on my first book which will be published soon! LinkedIn

Leave a Comment