When your skateboard has too much wheelbase, it can cause the deck to be unstable and difficult to control. If your wheels are not leveled, you will end up skating on soft ground which makes the board very susceptible to breaking.
Riser pads elevate the skateboard above the surface so that you have a better foundation from which to perform tricks and maintain stability while skating. Improperly leveling or mounting your wheels may also result in poor performance because of instability on hard surfaces or skidding on soft terrain.
Does A Skateboard Need Riser Pads?
If your skateboard has too much wheelbase, you may be skating on soft ground and risk injury. To level the wheels and provide better grip, install riser pads.
Skaters often find that their boards are elevated higher than the surface when using risers as they improve stability and prevent slipping during tricks or jumps.
Improper installation of risers can also cause your board to wobble or even fall off the ramp altogether- always consult with a professional before making any changes.
You Have Too Much Wheelbase
If you are purchasing a new skateboard, make sure to get riser pads. A longer wheelbase will give you more stability and control when skating on tricky terrain or tight spaces.
Riser pads can also help reduce the amount of wear and tear on your board’s wheels over time. It is important to measure the width of your deck before buying riser pads so that they fit snugly without causing damage or noise from movement.
Buying risers pads in addition to a new skateboard will ensure that your ride is fully customized for your needs.
Your Wheels Aren’t Level
If your skateboard has risers to raise the wheels off the ground, you need pads to keep them in place. Risers can help with stability and safety when skating around obstacles or down hills.
The right pad will protect your board while keeping it level so that you don’t have to worry about flipping over or losing balance on a trick. There are different types of pads available, including soft foam, hard plastic, and metal plates.
Make sure to buy riser pads for your specific skateboard model before heading out to purchase one.
You May Be Skating On Soft Ground
If you are skating on soft ground, a set of risers may help keep your board from sinking in. Risers come in different sizes and shapes to accommodate most boards.
Make sure the risers fit your skateboard well so that it doesn’t wobble or move during use. You can purchase risers either separately or as part of an accessory kit for your skateboard.
Check the manufacturer’s instructions to make sure that you install the risers properly and avoid damaging your board.
Riser Pads Help To Elevate The Board Higher Than The Surface
Skateboards need risers to elevate them above the surface, so they don’t hit it when you’re skating. If your skateboard doesn’t have riser pads, it may not stay elevated on flat surfaces and could potentially fall off.
Riser pads come in different shapes and sizes to fit any skateboard size or brand. You can find them at most hardware stores and online retailers like Amazon. Make sure that the pads are securely fitted before using them; if they’re not, your board will move around while you’re skating which could lead to an accident.
Do skateboarders use riser pads?
Skateboarders use risers pads to help them stay on their boards while they’re skating. These pads are also used to prevent the board from slipping on icy surfaces.
Skateboarders often use risers pads to help keep their boards in place and absorb shocks. Riser pads are also necessary if the skateboard deck is made with wheels that are smaller than 55mm in size.
If you’re a skateboarder, it’s important to make sure that you have a set of riser pads for your gear.
How do I know if my skateboard needs risers?
If your skateboard doesn’t have risers, it can be difficult to keep it balanced while you’re riding. This is because the board will bounce up and down more than usual, which can cause you to lose control.
To check if your skateboard needs risers, stand next to it and try to balance it by pressing down on both ends at the same time. If you can’t do this easily, then your skateboard probably needs them.
Check to see if your skateboard has riser slots – most decks do
Most skateboards come with risers, which are small holes that help the board stay level when you’re skating. If you don’t have risers on your board, try using 1/8″ shock pads. When you set up your wheels correctly, this will also solve the problem of wobbling and instability when skating.
Make sure the wheels are properly set-up on the deck with a Truckskate Peg Tool
If you don’t have riser slots or if they’re not wide enough, it can be difficult to get your wheels properly aligned on the deck surface. The correct setup is essential for stability while skating and helps prevents injuries from occurring due to unstable boards or skates.
Use caution when skating on surfaces that may be difficult or dangerous to grip (gravel, sand, etc.)
When skating outdoors in rough conditions such as gravel or sand, take extra care not to fall off your board. Skating around these types of obstacles requires a lot more skill than simply grabbing onto something solid like a rail or staircase; make sure you know how to handle yourself before hitting the ground floor.
Do skateboard risers matter?
Skateboard risers are a common feature on skateboards and can make the board more stable. They’re also sometimes used to help riders who are beginners or have difficulty balancing on their boards.
However, some people argue that they don’t actually improve stability and can even cause accidents. So, do skateboard risers really matter?
Wheelbite Prevention
Skateboard risers are important for preventing wheel bite.
These risers help to raise the deck of your skateboard so that it’s less likely to touch the ground and cause damage. They also keep the wheels off of hard surfaces, which can improve performance on these surfaces.
Pressure Cracks & Warping In Deck
If there are any pressure cracks or warps in your skateboard deck, they will increase the chances of it getting damaged by wheelbite. Skateboard decks are often made out of wood, which is a natural material that can be subject to cracking and warping under stress.
Riser Pads Prevent Deck Bite
Risers pads act as a buffer between your board and the surface you’re skating on, helping to prevent any damage from occurring when you hit something with too much force (like a curb).
Improved Performance On Hard Pack Surfaces Hardpack surfaces tends to be rougher than other types of terrain, which can make them tough for boards equipped with standard riser pads to handle well.
With riser pads installed on your skateboard, you’ll see improved performance on these types of surfaces as well as others where wheels might otherwise contact the ground directly.
Prevents Wheels From Contact With The Ground When You Jump Off Your Board If you jump off your board while it’s still rolling (rather than landing), then all four wheels will come into contact with the ground at once – this is dangerous not only because it hurts but because skaters who land like this typically have a more difficult time controlling their boards during later jumps and tricks.
Why do skaters use risers?
Risers are pieces of plastic, metal or wood that help skaters stay on their boards while they’re skating. They keep the skater’s feet above the surface of the ice and prevent them from sliding off.
- Skaters use risers to dampen vibrations and protect their deck from shock. Risers help keep the wheels in contact with the ground, which reduces vibration and noise levels. They also increase the distance between your skater’s trucks and deck to reduce wear on these parts of the equipment. Finally, angled risers have so-called “angled pads” that change the angle at which trucks hit the deck – this helps improve stability while skating.
- Risers are commonly made out of metal or plastic and come in a variety of shapes and sizes depending on what type of skating they’re designed for (e.g., street, vert ramps).
- When you purchase new riser pads, it is important to match them up correctly to your truck’s axle size (or width) as well as its height above the ground surface. This will ensure that your gear remains stable during gameplay sessions without causing undue wear or damage to either device.
- In addition to absorbing shocks caused by falls or collisions, risers can also prevent decks from warping over time due to skateboard abuse – this is especially useful for long-term outdoor use where weather conditions may cause extreme fluctuations in temperature.
- Skaters often adjust their risers when using different types of surfaces such as stairs or curbs since these features create unique shock patterns which must be taken into account when designing a set of riser pads.
To Recap
A skateboard needs riser pads to prevent damage to the board when it is being ridden. Skateboards also require a good grip, so risers pads help keep the rider’s feet firmly planted on the board while they are skating.
