A misaligned steering system can cause your bushings to lose flexibility over time, resulting in an uneven squash. Impact from collisions or bumps can also force the bushing into a specific direction, creating an imbalance.
When this happens, it’s often difficult to correct the issue without replacing the entire steering system altogether. If you notice that your bushings are squashing in one particular direction more than others, it may be time for a new set of bushings.
Steering alignment should always be checked after any type of collision or impact to ensure proper operation and safety for both you and your vehicle.
Why Is My Skateboard Uneven?
If your steering is misaligned, it can cause the bushings to lose their flexibility over time. Bushings that have been impacted can squash in one direction more than the other, leading to an uneven squish of the suspension system.
When new bushings are installed they may be slightly out of alignment from each other and this will cause an uneven impact on the bushing causing them to squash in one direction more than another. The unequal squash caused by steering can lead to a loss of function for your suspension system as a whole over time if not corrected.
Steering Misalignment
When your skateboard is unbalanced, the weight of the skateboard causes one wheel to rotate more than the other. This can cause an uneven ride and even steerage which makes it difficult to control your board while skating.
If you notice that one wheel consistently turns in a different direction from the rest, it may be time for an alignment checkup to fix your steering misalignment issue. There are several ways you can correct this problem including using weights or adjusting bearings on wheels and trucks.
Make sure to consult with a professional if you’re not comfortable trying these fixes yourself – they could save you from ruining your skateboard altogether.
Bushings Lose Flexibility Over Time
Over time, bushings lose their flexibility and can become uneven on your skateboard. This can cause the board to wobble while you’re skating, making it difficult to stay in control.
To fix this issue, replace the bushing on your skateboard as soon as possible. You can also try using a lubricant or wax to help restore its flexibility and keep it in good condition for longer periods of time.
Make sure that you regularly check the condition of your bushings by gently pressing down on them with your fingers – if they feel stiff or hard, they need to be replaced.
Impact Causes Bushings To Squash In One Direction More Than The Other
When a skateboard is ridden, the wheels spin and cause the bushings to move back and forth. This motion can cause one of the bushing’s sides to squash more than the other side.
If this happens over time, it will create an uneven surface on your board that you’ll notice when riding it. To fix this issue, you can replace or adjust the bushings on your skateboard depending on which direction they’re squishing in most severely.
It’s important to keep your board properly lubricated so that these parts don’t wear down over time and affect its performance.
New Bushings Can Be A Bit Misaligned
Uneven skating can be caused by a variety of different factors, but most commonly it is due to the bushings not being properly aligned. If you’re experiencing uneven skating, try replacing your bushings as soon as possible.
You will need to remove the screws that hold on your skateboard’s trucks and wheels in order to replace them with new ones. Make sure you have the correct size bushing before purchasing them and make sure they are correctly installed afterward too.
If after following these steps still find that your skateboard is unlevel, then there may be something wrong with its foundation or deck – consult a pro for help.
Uneven Squash Caused By Steering
When you’re skating, the weight of your skateboard presses down on the trucks and sends a message to your wheels. If one or more of those trucks are out of balance, it can cause squashing in all directions – even up and down the board.
Make sure you’re steering with equal pressure from both feet at all times while keeping an eye on your truck’s balance. Getting help from a friend can also help keep things level as you ride – but be careful not to overload them. Once you’ve got everything balanced out, make sure there’s no excess tension on any cables or pulleys.
Why does my skateboard not go straight?
If your skateboard doesn’t go straight, there might be a problem with the bushings or hardware. To adjust them, you’ll need to remove some of the bolts holding them in place and slide the bushing on either side until it’s moving smoothly.
If that still isn’t working, check for loose screws or nails – those can cause problems too. Finally, clean off any dirt and wax residue from the trucks (the metal plates that move underneath your board) and apply a light coat of lubricant before re-installing everything.
Why does my skateboard turn the opposite way I lean?
When your skateboard leans to the left, the trucks are too tight and cause it to turn in that direction. If your board is not level, you can adjust the height of the screws on either side or use bushings to change its angle.
A loose connection between your deck and trucks (called a bush) will result in an unlevel surface which causes boards to lean in one direction or another. Tighten these connections using bolts/screws appropriately.
Why does my skateboard turn when I Ollie?
Skateboarders often experience a problem when ollieing – their skateboard shifts from front to back. This can be caused by faulty hardware, wheels not being level and/or needing to be trued, or wrong height adjustment for your board.
To avoid this issue altogether, make sure your risers, bearings or bushings are in good condition and properly lubricated. Keep your grip strength while doing tricks; if the wheels are not leveled correctly then they will have trouble holding traction which could cause the skateboard to shift during an ollie attempt.
Finally, remember that you should adjust your height according to the size of your board.
Is it better to have loose or tight trucks?
Tight trucks are better for cargo and hauling purposes, but they can be more difficult to drive. Loose trucks are easier to control, but they may not be as strong in the corners.
It’s up to you which type of truck is best for your needs.
Tight Trucks Reduce Speed Wobbles
Tight trucks help to reduce speed wobbles, which can be a problem when you’re riding your bike downhill or on a vert ramp session.
When the truck is too loose, it will cause the front wheel to wiggle back and forth uncontrollably. This instability can lead to crashes and injuries.
Downhill Riding Requires Tighter Trucks
For optimum performance, while descending steep hills, it’s important to tighten up your suspension system before hitting the trailhead.
A looser set of shocks will cause more stability issues in these high-speed situations, so make sure that you get your trucks as tight as possible before heading out for some shredding action.
For Vert Ramp Sessions, Tighten Your Trucks For Safety’s Sake
When participating in vert ramp sessions – whether it be skateboarding or BMX – always make sure that you adjust your suspension accordingly in order to avoid any dangerous stability issues on the ramps or terrain below you.
Loose trucks may cause your board or bike to fly off of the slope unexpectedly, putting both yourself and others at risk for injury.
Loose Truck Ends May Cause Stability Issues On The Trail
A loose end on either side of a truck can create unstable conditions when riding down mountain trails – this is especially true if you’re using 2WD mode rather than 4WD mode because 4WD allows for more traction between the wheels and ground. If this condition persists long enough, eventually one corner of the tire will start spinning much faster than the other due to uneven weight distribution across all four tires (inward rotation).
This type of imbalance causes a sudden loss of control over your vehicle… not ideal during adrenaline-fuelled ride down gnarly singletrack. A Good Rule Of Thumb Is To Tighten Your Trucks When You Intend On Riding Fast.
Should skateboard wheels be tight or loose?
There is no right or wrong answer to this question – it depends on what you’re trying to achieve with your skateboard. If you want a smoother ride, then you should tighten the wheel bearings.
However, if you’re looking for more grip and stability, then you can leave the bearings loose.
Skateboard Wheels Should Be Tightened
When you tighten the skateboard wheel bearings, it will help to keep them from moving and causing wobbles or wheel bite.
However, you should only use a light amount of force when tightening these bearings as too much can cause them to become loose over time.
Too Much Tightening Causes Wobbles and Wheel Bite
If you’re constantly having to adjust your skateboard wheels because they’re wobbly and getting bitten by the ground, then there may be too much pressure being applied to the bearing area.
Over-tightening can also damage the wheel itself so it’s important not to go overboard with your maintenance tasks.
If You Have Trouble Turning Your Board Due To Bearing Issues.
If you have trouble turning your board due to bearing issues, it might be a good idea to have them tightened up just a bit more than usual. This will help reduce any wobble or movement that is happening in those areas and make skating on the pavement a lot easier overall.
Is skateboarding good exercise?
There is a lot of debate on whether or not skateboarding is actually good exercise. While some people argue that it can be a great way to stay fit and healthy, others say that it’s just too dangerous.
The truth probably lies somewhere in the middle – skating can definitely help you burn calories, but make sure you do it safely.
- Skateboarding is a great way to burn calories and increase your strength, endurance, balance, and coordination. It also tones the body muscles and can be an enjoyable activity for people of all ages.
- Skateboarding is a complete workout that works every muscle in your body including your core muscles. The more you skate, the stronger and faster you will become.
- Skating helps improve balance because it requires good posture and good timing when skating on curved surfaces or jumps. This improves overall agility as well as stability while performing other activities such as running or jumping.
- Skateboarding can help individuals with poor balance regain their equilibrium quickly by increasing their strength, stamina, reflexes, speed, coordination, and agility.
- Skateboarding is a fun physical activity that can be enjoyed by everyone regardless of age or fitness level.
To Recap
There are a few things you can do to correct an uneven skateboard. First, check that all of the wheels are properly inflated. Next, use a level to make sure the deck is straight.
Finally, adjust the trucks if necessary. Skateboarding is an active sport and adjusting your board regularly will help it perform at its best.
