Why Is My Skateboard Making A Clicking Sound?

Jessy Jean Bart

Updated on:

Skateboard Making A Clicking Sound

Skateboarding can be a lot of fun, but it’s not without its hazards. One of the dangers is that skateboards can click when they are being ridden over certain surfaces.

This clicking noise is often caused by overlapping washers and kingpins/bushings, which should be replaced if they start to cause problems.

Why Is My Skateboard Making A Clicking Sound?

Overlapping the washer and kingpin/bushings may cause the sound of a clicking skateboard. Check that the washer is not overlapping the kingpin/bushings, and if it isn’t, replace them.

If you’re skateboarding and your board is making a clicking sound, there’s a good chance that it’s because one of the wheels is loose. To fix this problem, you’ll need to tighten the wheel nut and check for any other signs of damage.

  1. Wearing Out The Washers
    As the washers wear down, they can become less effective at holding the kingpin in place and eventually make a clicking sound when you try to ride your skateboard.
  2. Damaged Kingpins
    If the kingpin is damaged, it may not be able to hold the bearings in place as well which will cause it to click.
  3. Loose Bearings
    Another common issue with skateboards is that loose bearings can make a clicking noise when you ride them. This is because they wiggle around inside the bearing cup and cause friction against each other.

Why are my skateboard trucks creaking?

If your skateboard trucks are squeaking, it’s likely because the bushings are dry and need to be lubricated. A little lubricant will help fix this issue and keep your board in good working order.

Keep a can of lubricant handy so that you can apply it when needed. Don’t overlook this common problem – don’t let your boards start to creak. Apply a small amount of lubricant regularly to keep them running smooth.

How do you fix a clicking truck on a skateboard?

When your truck starts to click, the cause is usually a loose pivot cup or shavings of soap or wax caught in the gears. To fix this issue, first remove your hanger and take out the pivot cup.

Use a small amount of soap or wax dropped into the empty cup to lubricate it evenly before replacing it onto your truck’s axle (make sure you use plenty of pressure when fitting it back on). Repeat these steps until clicking noise disappears entirely.

If everything fails and clicking persists despite following these simple tips, there may be some other mechanical issues that need addressing.

How do you clean skateboard bearings?

Skateboard bearings need to be cleaned periodically in order to keep them running smoothly. There are a few different ways to do this, depending on the solvent you use and your personal safety precautions.

Make sure to wear gloves and avoid contact with skin when cleaning them. Soak the bearings in acetone, isopropyl alcohol or mineral spirits for several minutes before using a dish or wide-mouthed bottle as a container to swirl around the bearings occasionally.

Keep skateboard bearings clean and running efficiently by following these easy steps regularly.

How tight should skateboard wheels be?

The tighter the wheel nuts, the better the skateboard will ride and handle. When tightening the wheelnuts, it is important to not overdo it as this can impede on spin and cause instability in your skateboard.

Check that each nut is snug against the axle before securing with a hex wrench – if there is any play at all, tighten further until you have achieved stability.

Why is my new skateboard so loud?

When you assess your skateboard, make sure to check all of the components for damage or wear. Replace any parts that are damaged and adjust any other aspects as needed.

If the bearings are dry, add some oil before using the board again. Add washers if wheels flat-spot; replace screws if they’re loose; and use a pivot cup and bushings kit for an improved ride quality.

At what age should you stop skateboarding?

Skateboarding can be fun for all ages, no matter how old you are. If you’re still healthy and in reasonable physical shape, skateboarding is a great way to stay active.

When it comes to skateboarding, age is just a number. It’s never too late to learn this exciting sport – practice makes perfect. You might not look as cool skating with your buddies when you’re 50 years old but that doesn’t mean you can’t have some fun learning this amazing activity.

Is it okay to skateboard on sidewalk?

If you are just starting out, it is a good idea to learn the rules of the road before you hit the pavement. Skateboarding on sidewalks can be fun and easy, but please obey local regulations if they exist.

Remember that skateboards are not motor vehicles so you do not need a special license or insurance to ride them safely on public streets and sidewalks. When riding your board in an urban environment make sure to yield to pedestrians, cyclists and other drivers as well – skateboarders should always stay aware of their surroundings.

Ride safe and have some fun – sidewalk skating isn’t illegal unless posted otherwise.

Frequently Asked Questions

How often do skateboarders get hurt?

Skateboarding is a fun and exciting activity, but it can also lead to serious injury. Approximately 70,000 injuries requiring emergency treatment occur each year.

Why do my bearings click?

When your bearings start to click, it may be because of the metal moving a little too much. To fix this issue, you can use Lithium Grease in the bearing seat.

How loud is skateboarding?

Skateboarding noise can be counted at 50 feet as negligible. However, sharp sounds from some tricks (like ollies) could reach up to 71 decibels. Other tricks (like grinds) might sound like you’re hitting a ball with a bat.

Is wd40 good for skateboard bearings?

If your skateboard bearings seem to be losing their lubrication, you can use WD-40® Multi-Use Product to help. Spray the entire surface of the wheel and ball bearing, then leave it to work for a few minutes. Next, submerge the parts into a bowl of clean water and let them soak for an additional few minutes. Your wheels and bearings should now be grime free.

How long do skate bearing last?

Skate bearings should last for 1-2 years if given proper care and maintenance. Be sure to keep them clean, slippery, and free of sharp edges.

How often should I lube my skateboard bearings?

It is highly recommended to use oil on your bearings after every cleaning, but it is also important to keep an eye out for dry bearings. Skaters should apply lubricant once there are any signs of the bearings drying out.

Do you need to lube skateboard bearings?

You don’t need to lube your skateboard bearings, but it’s always a good idea to clean them and polish them if they start looking dirty or faded.

Is it better to skate loose or tight?

Skate loose if you’re new to the sport. This will reduce wobbles and help ensure a smooth ride at high speeds. later, tighten your trucks when needed for stability on vert ramps or downhill riding

Is it easier to Ollie while moving?

The best way to ollie while moving is not to try it, but rather learn how and when to do it. If you are able, practice landing lightly on your feet first so that you have a better foundation for doing an Ollie in the future.

Why do skateboards wobble at high speeds?

Skateboards wobble because of Self-Exciting Oscillation. This is caused by the energy of your velocity Feeding into the natural oscillation of your trucks as they try to return to their natural (neutral) position, continually increasing the amplitude.

To Recap

There are a few different things that could be causing the clicking sound your skateboard is making, so it’s best to take it to a professional for diagnosis. It’s possible that something is wrong with the bearings or wheels on your board, and in most cases this can be fixed without having to replace the entire thing. If you’re not sure what might be causing the noise, it’s safest to bring your board in for inspection by a professional.

Photo of author

Jessy Jean Bart

I am a professional skateboarder and I have been riding for over 10 years. I started my career in 2014 when I was only 18. I got into skateboarding because of my brother, who is 6 years older than me, who introduced me to the sport when he was around 8 or 9. He would always bring his board to school with him and we would go outside and ride it together. LinkedIn

Leave a Comment