What Size Wrench For Skateboard Trucks?

Jessy Jean Bart

Wrench For Skateboard Trucks

Kingpin bolts are made from premium quality materials and come in a variety of sizes to fit any wheel bolt need. Wheel bolts should always be tightened with a wrench that’s the same size as your bolt, otherwise you could strip the threads.

Board screws can also be tightened using a wrench, but they often require an Allen key instead of standard screwdriver bits because their heads are hexagonal shaped Nuts must be screwed on tightly or they’ll loosen over time-keep this in mind when choosing which nuts to buy and how much torque to apply.

Specifications for different types of wrenchheads vary depending on the material being bolted together; it’s important to read product descriptions carefully before purchasing.

What Size Wrench For Skateboard Trucks?

Kingpin Bolt Wheel Bolts Board Screw Nuts Wrench Specifications Inexpensive Tools You’ll Love How to Change a Tire on Your Car: The Right Way Tips for Better Home Maintenance How to Fix a Leaking Faucet: A Step-by-Step Guide.

What size is the nut on skateboard trucks?

The axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size).

The thread size for these axle nuts is 5/16″. Be careful not to lose them – they’re small and easily misplaced. Keep an inventory of your original screws, washers, and nut so you can re-assemble your deck should something go wrong.

Don’t forget to measure the depth of your wheelbase before purchasing replacement parts.

What size is skateboard truck hardware?

Skateboard truck hardware comes in different sizes to fit most skateboards. Bolt and nut size vary depending on the type of skateboard that you are using it for.

Make sure to get the right mounting hardware for your board. You can find bolts, nuts, and lock washers in various lengths at most stores (check out online retailers too).

Keep an eye out for sales or coupons when shopping for mounting hardware–you may be able to save a few bucks.

What tool do I need to take my skateboard trucks off?

If your skateboard trucks are glued on, you will need to use a Phillips head screwdriver and a socket wrench to take them off. You can also take them off with a skate tool if you prefer – just make sure to have the correct size skate tools for the screws that hold it on.

Be careful when taking care of your new boards – don’t damage the trucks or glue holding them on. Once they’re off, clean everything up so that the truck is ready for its next adventure.

What tool do you use to tighten skateboard trucks?

To tighten skateboard trucks, use a tool such as a skate tool or other useful one. Turning the big nut in the center of the truck controls the tightness of the trucks- it points directly to ground while skating and is located between wheels Tighten them by turning clockwise until they’re snug

What size is a skateboard kingpin nut?

If you’re looking for a new set of kingpin nuts, be sure to choose the right size. These fresh new nuts will keep your skateboard locked up and performing at its best.

Be prepared with a set of kingpin nuts in case you need them – these are standard size and fit on most skateboards/longboards. This is an affordable option that includes 2 locknuts – enough to outfit 2 trucks.

Make sure to order a set of kingpins today so you’ll be able to stay locked-in while shredding the streets or park.

How do I tighten my skateboard bolts?

Make sure to tighten your skateboard bolts from both sides using a wrench or socket on the nut side and your phillips screwdriver or Allen key on the bolt side.

If you don’t have a tool on each side, hardware will just spin in place. Always keep an eye on the tightening torque as it can affect your board’s performance over time Follow manufacturer’s instructions for proper installation.

How do you take trucks off without skate tool?

Start by removing the bolts that hold the truck in place with a cross-head screwdriver. Make sure to keep an eye on the skateboard while you’re doing this, as it may fall off if not secured properly.

Once all of the bolts are removed, carefully pry or twist the truck off of its axle and remove it from your skateboard altogether. Be careful when handling these screws – they can easily break if mishandled.

Frequently Asked Questions

Is it better to skate loose or tight?

In order to enjoy skiing or snowboarding at their best, it is important that the skis and bindings are properly tightened. Tighten your trucks by using a wrench on both ends of the screwdriver and tightening until you’re happy with the result. For more information on how to tighten your skis or bindings, visit our website or consult with an experienced ski racer.

How loose is too loose for skateboard trucks?

If your trucks feel loose when you lean, they may be too loose. Tighten the screws on your trucks if needed.

What size are king pins on truck?

The king pin size for a semi-trailer is 2 inches diameter.

What size bolt fits a skateboard bearing?

Check the skateboard bearing size against your wheel diameter and choose the correct bolt.

What size is longboard hardware?

To find the hardware size for a skateboard, measure the length of the deck and multiply that by 8. For instance, if your skateboard measures 36in (91cm), then 1″ hardware will be needed to mount it on a 7/8″ axle.

Are skateboards supposed to wobble?

Some skateboarders like their boards wobbly because it makes them more stable when they’re skating. After all, a wobbly board will help you stay in balance and avoid falls.

How tight should I tighten skateboard wheels?

If you have tight wheels, tighten them as much as possible.

What size are skateboard hardware nuts?

A standard skateboard kingpinnut is a 3/8″ hex nut or (24 UNF). This nut size will fit any skateboard in the standard range of deck widths from 7.25″ to 8.5″.

How do you loosen the axle nut on a skateboard?

If the wheel comes to a sudden halt and rolls back slightly, it’s too tight. Use a wrench to loosen the nut, but do so only slightly. Just nudge it counter clockwise and spin the wheel again. If it still comes to a quick stop, bump it backwards again.

What size are skateboard axle nuts?

If you have an 8mm axle, these are the size to fit. If not, check your axle nuts’ thread size and see if it matches.

Should I oil my skateboard trucks?

Oil your skateboards’ trucks regularly with a quality lubricant to keep them running smoothly and evenly.

Are pivot cups necessary?

There is no need for pivot cups on fingerboard trucks. All trucks will perform and turn well without them.

How long do skateboard trucks last?

Your skateboard truck’s life depends on its quality and its owner’s usage, but on average, it can last for 2 to 4 years. You can still maximize your truck’s service life if you can give them enough attention and care.

Why do my skateboard trucks lean to one side?

If your skateboard is leaning to one side, the most likely cause is that there are bushings in it. To fix this, remove any of the bushes and re-install them in a different location. If you have hardware problems, try tightening or loosening it as needed.

To Recap

A skateboard truck wrench is a specialized tool that is used to tighten or loosen the bolts on a skateboard truck. Skateboard trucks are responsible for holding your board in place while you’re skating and they can become loose over time, which can lead to instability and accidents.

A skateboard truck wrench is important for keeping your board safe and stable.

Photo of author

Jessy Jean Bart

I am a professional skateboarder and I have been riding for over 10 years. I started my career in 2014 when I was only 18. I got into skateboarding because of my brother, who is 6 years older than me, who introduced me to the sport when he was around 8 or 9. He would always bring his board to school with him and we would go outside and ride it together. LinkedIn

1 thought on “What Size Wrench For Skateboard Trucks?”

  1. Thanks a lot. In skateboarding, it’s not always about having new or expensive parts. It’s also about knowing their perfect configuration. In reality, two identical parts may have differences in performance because of their setup.


Leave a Comment