Make sure the hardware you choose matches the skateboard’s dimensions and weight. Don’t overtighten screws or bolts, as this can damage your board. Keep all of your hardware organized and clean to avoid confusion during a crisis situation.
Always check with a skater’s weight before setting up their new board in order to prevent injuries in the future.. Lastly, make sure that if you are borrowing someone else’s equipment, be aware that they might have different specifications than yours.
What Size Is Skateboard Hardware?
Use 7/8” hardware if your skateboard requires risers. If your skateboard doesn’t require risers, get 1” hardware instead. Don’t overtighten screws or bolts – they’ll break and you’ll have to replace them.
Keep hardware organized and clean so it’s easy to find when you need it – especially during a game. Check the skater’s weight before setting up a new board to make sure they’re not too heavy for the deck size (or vice versa).
Have fun skating.
What size screw is skateboard hardware?
Skateboard hardware comes in a variety of sizes to fit most setups. Standard bolt sizes are 10-32 and work well for most skateboards and hardware setups.
You’ll need to find the right size screw for your board and accessories, so be sure to check specifications before purchasing. Be mindful of the thread count when choosing screws – this will affect how strong the screw is and how long it will last.
Go ahead and get those bolts ready – there’s no need to worry about sizing them up until you actually have a chance to use them.
What size nut is skateboard hardware?
If you need to replace a skateboard kingpin nut, be sure to get the right size for your board. A standard skateboard kingpin nut is a 3/8″ hex nut or (24 UNF).
Be sure to measure the width of your deck before shopping for a newnut and refer to the chart above for compatible sizes. You can find quality hardware at most stores that sell skateboards and other outdoor gear.
Always use safety precautions when working with nuts and bolts – keep fingers out of the way.
What size are skateboard nuts?
The axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size).
The thread size for these axle nuts is 5/16″. Make sure to buy a set of these nuts when you are buying your skateboard or longboard. If you ever need to replace them, be sure to get the same size as your original ones.
Don’t forget to store your old nuts in a safe place in case you need them later on.
What size is a skateboard kingpin nut?
Kingpin nuts make your skateboard safer and more stable, so stock up on these essential parts. The standard size of these nuts means that they’ll fit onto most trucks out there- making them a must-have for any skater.
Included in the package are 2 locknuts, ensuring you have everything you need to keep your truck secured from damage. Be sure to order yours today; these will go quickly. Keep yourself locked down with quality kingpin nuts from SkateOneStore.
What diameter is a 10 32 screw?
A 10-32 screw is commonly used in construction and has a diameter of 3/16″. This size can be found at most home improvement stores and is perfect for many applications.
Make sure to buy the correct size by measuring it with precision before purchase. Be aware that a 10-32 screw does not have much grip, so handle with care when installing or removing them from something delicate or heavy duty like wood.
Which skateboard bolts do I need?
If you skate without shock or riser pads, select 7/8” – 1” bolts. For standard shock pads with a height of 1/8”, use 1” – 1 1/8” bolts. For higher shocks and boards that use longer bolts (1 3/4″), choose the appropriate length bolt based on your specifications.
Make sure to have the correct size bolt on hand when assembling your board; it’ll make the process much easier.
What size bolt fits a skateboard bearing?
Skateboard bearings come in a variety of sizes and many skateboards have different size wheels – regardless of brand or model. The universal measurements for bearings are 8mm (core), 22mm (outer diameter), and 7mm (width).
Bearing sizes can be found by measuring the width, height, and depth of your skateboard wheel – remember to divide by 2 to get the bearing size in mm. Bearings fit all skateboard wheels that Warehouse Skateboards sells; just make sure you measure your board’s wheel before buying so you know what size is required.
If you ever need to replace a bearing on your skateboard, don’t worry – we’ve got them all here at Warehouse Skateboards.
Frequently Asked Questions
What size sockets are on a skate tool?
You can find skateboard T tools in most stores. They come with different sizes of sockets to fit most skateboards and long boards.
What size is a skateboard axle?
The axle nut size for a skateboard or longboard is 8mm.
What size is longboard hardware?
Some longboards and retro cruiser boards can have more or thicker plies, which means longer hardware may be needed to accommodate such variation (use 1 1/8”-1 1/4” hardware to be safe).
What is skateboard hardware?
Skateboard hardware come in a variety of different styles and colors. Find the perfect set for you with our favorite brands like Diamond, Shorty’s, Independent, Shake Junt, and more.
What is an axle nut?
There are a few things to keep in mind when it comes to axle nuts. First and foremost, they should be tightened evenly so that the wheel can move freely. Secondly, make sure the nuts do not over-tighten or cause undue wear on the wheel; this could lead to faulty movement and eventually20PROPERTY_OWNERSHIP NOTICE.
What size is a skateboard bushing nut?
To size a skateboard bushing nut, measure the outer diameter of your bushings and compare to the standard 1”. If you have risers on your board, add an extra 1/8″ (3 mm) to the inner diameter of each washer; if not, leave them all at 1″. Mount the hardware onto the bushing using 10-32 mounting screws.
What size are king pins on truck?
The standard king pin dimension for a semi-trailer is 2 inches diameter.
Do all bushings fit all trucks?
Every truck has stock bushings, but some prefer to replace them. Not everybody weighs the same and skaters prefer different tightness on the trucks. Note that bushings need to break in a little before you can tell you want to replace them.
Is M5 and 10-32 the same?
You can’t use M5 and 10-32 screws interchangeably. The size of the screw is different, so you’ll need to find a new one if you’re using them together.
Is M6 the same as 10-32?
The M6 screw is the same size as 10-32 screws.
What does a #10 screw mean?
The number “10” is simply a size designator. The number “32” refers to the 32 threads per inch. You can identify a 10-32 screw by measuring the diameter with a ruler at exactly 3/16″ (0.1875″).
How tight should skate hardware be?
It’s ok if your hardware sticks out a little bit, but try to keep the extra length less than 1/4 of an inch. If your hardware doesn’t at least reach through to the top of the nut and doesn’t sink into the “Nylon Lock” part of the nut, then your hardware is too small and will fall off really quickly.
To Recap
Skateboard hardware is measured in millimeters, so if you’re looking for a size that’s not listed or want to convert between sizes, divide the number by 20. For example, if you wanted to know how many mm skateboard hardware corresponds to an inch, divide 100 by 20 and then multiply the result by .8 (to get 8).
