What Size Bearings Do You Need For 60mm Skateboard Wheels?

Jessy Jean Bart


Properly installing bearings on your wheels is essential for a smooth ride. The size of the bearing, as well as its width, will determine how smoothly your wheels turn.

Bearings come in different sizes and types to fit a variety of wheel diameters and widths. Polyurethane bearings are especially recommended for skateboards because they’re durable and last longer than other types of bearings..

Finally, make sure to get 83A polyurethane bearings specifically designed for skateboard wheels- they’ll work best with boards with a diameter of 60 mm and a width of 45 mm.

What Size Bearings Do You Need For 60mm Skateboard Wheels?

Your wheels need bearings – the size of the bearing matters. The width of your wheel also matters – choose a skateboard bearing with wide-width 8mm Freedare bearings fit for boards with a diameter of 60 mm and a width of 45 mm Bearings come in different sizes, so it’s important to match them up correctly to your board Check out our selection of 83A polyurethane skateboard bearings for all sorts of wheels.

What size bearings do skateboard wheels use?

The size of bearings that skateboard wheels use is very important because it affects the wheel’s performance and durability. There are a few exceptions to this rule, but most skateboard wheels use “608” size bearings.

Bearings come in many different shapes and sizes, so be sure to choose the right one for your board. Be aware that bearing types can affect how your board moves and performs; make sure you research which type will work best for your specific needs before making a purchase.

Skateboarding isn’t just about rolling around on pavement- it also requires quality bearings in order to perform at its best.

Are 60mm skateboard wheels too big?

Skateboard wheels come in a variety of different sizes and each affects the way your board behaves on the ground. A smaller wheel will give you more control when doing technical street tricks, but won’t work as well on smoother surfaces.

For going faster choose a bigger size – this will cause your board to spin faster and be more responsive. Be aware that larger wheels can easily get stuck in cracks or uneven surfaces, so take care while choosing. Don’t forget to check the width of the skateboard deck – most are between 31mm & 36mm wide which is perfect for 60mm skateboard wheels.

What size bearings do you need for 52mm wheels?

You need 22mm * 8mm bearings for the wheels on your bike. These bearings fit all 52mm bicycle wheels. Be sure to order the correct size bearing, or you may experience problems with your bike.

Make sure to keep track of the number and type of bearings that you have installed on your bikes so you don’t run into any trouble in the future. Keep a spare set of bearings on hand just in case something goes wrong with yours – it will make riding much easier.

Do all bearings fit all skateboard wheels?

Almost every skateboard bearing is the same size and will fit on any skateboard wheel and truck. When choosing your bearings, it is important to think about your experience level and riding style.

Bearings with higher-quality parts will be faster and more durable. Bearings are available in a variety of speeds, sizes, colors, and prices to suit everyone’s needs. It is important to clean your bearings regularly so they last longer and perform at their best.

Bearings can be replaced without having to take apart your entire skateboard or truck.

How do I choose skateboard bearings?

When choosing skateboard bearings, be sure to consider the ABEC rating. A higher rating means a bearing has a capability for greater speeds, but even the world record speed on a skateboard is not fast enough for the ABEC rating to make difference in skateboarding roll speed.

Keep your bearings clean if you want them to work at their best. Skateboarding is all about balance and control – trust in good bearings to help you stay on your board longer. Finally, always start with quality parts when building or upgrading your skateboard.

Are 60mm skateboard wheels good?

If you’re looking for the best skateboard wheels out there, choose a wheel diameter of 50-60mm. Wheels with a durometer of 95-101a are ideal because they provide good grip and speed on smooth surfaces.

Make sure to check the dimensions of your skateboard before purchasing wheels; some brands have smaller diameters than others. As long as you have a smooth surface to ride on, these hard wheels will do the trick.

Always wear Protective Gear when skating – injuries can happen at any time.

Can you put 60mm wheels on a skateboard?

You can put longboard wheels on a skateboard as long as the wheels are under 70mm in diameter and you have 1/2″ riser pads. A 60mm – 65mm wheel will provide more comfort when riding your skateboard, especially if you’re new to the sport or don’t want to experience too much difficulty turning.

Be sure to choose the right size of wheel for your board; anything larger than this may cause problems while skating, so be cautious. If you find that the board is becoming loose due to the added weight, then it’s time to remove those extra wheels before they do any further damage – no one wants an accident on their hands.

Finally, always make sure that you wear protective gear when skating outdoors: elbow and knee pads are a must.

Frequently Asked Questions

What wheels does Tony Hawk use?

Tony Hawk uses 53-56mm wheels.

Do pros use bearing spacers?

There is no need to use bearing spacers on longboarders and casual skaters; they likely won’t put enough pressure on their boards to ever need them.

What size are 608 bearings?

The Miniature Ball Bearings 608 – 8X22X7mm are a great choice for many rotary and factory automation applications. These bearings have an open style and offer good performance.

Is it easier to Ollie with smaller wheels?

There is no one definitive answer to this question as it depends on the speed and size of your wheels. Some people prefer smaller wheels for faster acceleration, while others find larger wheels more efficient. Ultimately, you’ll need to experiment with different sizes and speeds to see which works best for you.

Why are my bearings loud skateboard?

The noise comes from your wheel seats. If you’ve been skating for a while and haven’t replaced your wheels yet, the seating can develop gaps. If your bearings can move in their seating you just found your problem.

How do I know what size main bearings I need?

To measure the inside diameter of a main or rod bearing, use a dial bore gauge. The best ones are accurate down to 0.0001-inch and generally come as a set that offers a measurement range from 2 inches to 4 inches inside diameter (id).

What are the fastest skateboard bearings?

There’s no one answer to this question as everyone’s skateboard bearings will be different. However, some general tips on choosing the best skateboard bearings for your needs include checking their Spin Rating and how wide they are in comparison to other types of bearings. Additionally, look into how strong or light these particular bearings are so you can decide if you need them for more durable skating or faster spins.

How do you measure the size of a bearing?

To measure the size of a bearing, place the jaws of your Vernier caliper around the width of the outer ring of the bearing and close it until it meets the ring.

To Recap

If you are using 60mm skateboard wheels, then you will need to use bearings of at least 68x78mm.

Similar Posts:

How To Remove A Graphite Golf Shaft?

If you’re having trouble removing a golf shaft from the ball, try using boiling water. Boil some water and pour it over the golf shaft.

How To Make An At Home Golf Net?

Making an at home golf net is easy. All you need is a piece of sturdy cardboard, some tape, and a hole saw.

Yeti Half Gallon Vs Gallon

When you are looking to buy a Yeti Half Gallon, it is important to know the difference between a gallon and a half gallon. A gallon is 3.78 liters and a half gallon is 2.17 liters.

What Are Caps In Rugby?

Caps are the official headwear of rugby union. They protect players from injuries that could potentially end their careers, such as concussions.

Louisville Slugger Pitching Machine Tips

If you are looking to up your game on the baseball diamond, then you should consider taking some tips from a Louisville Slugger pitching machine. These machines provide users with realistic motion and feedback that can help improve their batting and pitching skills.

Kbs $ Taper Lite Vs C Taper Lite

The KBS $ Taper Lite is a lightweight helmet designed for motocross and another off-road motorcycle riding. It has a lower profile than the C Taper Lite, making it better suited for street use as well.

Photo of author

Jessy Jean Bart

I am a professional skateboarder and I have been riding for over 10 years. I started my career in 2014 when I was only 18. I got into skateboarding because of my brother, who is 6 years older than me, who introduced me to the sport when he was around 8 or 9. He would always bring his board to school with him and we would go outside and ride it together. LinkedIn

Leave a Comment