Should I Clean My Skateboard Wheels

Davis Torgerson

Should I Clean My Skateboard Wheels

Keep your wheels clean to prevent bearing damage. Check for Bearing Damage by turning the wheel and listening for a smooth or clicking sound from the bearings – if there’s any noise, it’s time to take care of them.

Remove Dirt And Rocks From Wheel Bearings with a coin, screwdriver, or similar tool before lubricating them with oil or grease. Lube The Wheels With A Grease Or Oil That Is The Correct Temperature Before Putting Them Back On Your Vehicle.

Should I Clean My Skateboard Wheels?

Clean your wheels to keep them rolling smoothly. Check for bearing damage and remove any dirt or rocks before lubricating the bearings. Keep your bike moving by lubing up the wheels every few rides.

Keep Your Wheels Clean

Skateboard wheels are a favorite target for dirt, dust and other debris. Regular cleaning will help your wheels run smoothly and prevent wear and tear. A can of compressed air is perfect for removing stubborn particles from skateboard wheel bearings, axles, trucks and more.

Be sure to clean all parts of the wheel before storing it away-even the underside where the grip tape is located. Cleaning your board regularly will prolong its life as well as make skating more enjoyable.

Check For Bearing Damage

Before cleaning your skateboard wheels, it is important to check for bearing damage first. If you find any signs of wear or tear on the bearings, then you will need to take your skateboard into a professional repair shop for service.

Cleaning your skateboard wheels can be done by taking them off and scrubbing them clean with a brush or sponge using warm water and soap. Make sure that all dirt, grease and debris are removed before putting the wheel back together again.

Bearings should be replaced every 3-6 months depending on how often you use your board.

Remove Dirt And Rocks From Wheel Bearings

Cleaning your skateboard wheels can help to keep them in good condition and make them easier to ride. Use a mild soap and water mixture to clean the wheel bearings and then dry them off with a cloth towel.

If the dirt or rocks are embedded in the bearing, you will need to take your skateboard into a professional repair shop for cleaning and replacement of the bearings. Using this simple guide will help you maintain your skateboards for years to come.

Keep an eye out for our next blog post on how to properly care for your Skateboard Wheels.

Lube The Wheels

Cleaning the wheels of your skateboard is important to keep them in good condition and prevent wear and tear. There are a variety of wheel cleaners on the market that will do the job quickly and easily.

Make sure you use a quality lubricant when cleaning your wheels to help reduce friction between them and the board’s surface. Be careful not to over-clean or damage your wheels, as this can lead to further deterioration or even failure.

Is it okay to wash skateboard wheels?

It’s okay to wash skateboard wheels, but be sure to use a mild soap and water. Use a soft cloth or brush to clean them off carefully. Do not use any harsh chemicals or cleaners on the boards themselves.

Remove Wheels From Board

Before you can wash your skateboard’s wheels, you first need to remove them from the board itself. This is done by simply popping the rivets that hold the wheel on and pulling it off.

Clean Wheels With Soap & Brush

Once they are removed, clean each wheel with soap and a brush.

Make sure to get into all of the nooks and crannies.

Let Wheel Dry

After cleaning, let each wheel dry completely before storing or using it again. If you plan on putting them back on the board later, make sure to do so properly – wet wheels will not stay put.

What can I use to clean my skate wheels?

There are a few different things you can use to clean your skate wheels. Some people like to use soap and water, while others prefer commercial wheel cleaners.

It really depends on the type of wheel cleaner you have and what you’re comfortable using.

Check Your Wheels First

Before trying to clean your wheels, it is important to make sure that they are actually dirty.

Skate wheels can get dirty quickly and you might end up doing more damage than good if you try to clean them without first verifying that the dirt is really there.

Soap & Water

Many people use soap and water when cleaning their skate wheels, but this approach isn’t always effective.

Weak soaps will not be able to remove the built-up layers of dirt on a wheel, while using too much water may cause your wheel to become wetter than it needs to be and increase the chances of damaging it further.

Dry Them Off Quickly

After cleaning your wheels with soap or water, dry them off as quickly as possible so that the moisture doesn’t start building up again.

This will help prevent any potential problems such as rusting or corrosion from taking place in the future.

Don’t Over-Do It

If you do decide to go ahead and clean your skate wheels with a cleaner, make sure that you don’t overdo it – too much liquid could damage your wheel permanently if applied incorrectly.

Why do skateboard wheels turn yellow?

When skateboard wheels are used and taken care of, they can last for years with proper care – but unfortunately, this is not always the case. The light from the sun causes urethane to break down over time, which results in yellow wheels – usually due to poor maintenance or abuse by the user.

Skateboard wheels that have been around for a while will often show signs of wear and tear such as yellowing; if you notice your wheel turning an unusual color, it may be time for a replacement. If you take good care of your skateboard wheels and keep them out of direct sunlight, they should last quite a while – even into adulthood.

Can I wash my skateboard with water?

Yes, you can wash your skateboard with water. Be sure to use a gentle soap and plenty of water to keep it clean and free from dirt or debris.

  • Washing your skateboard with water can damage the bearings, hardware, and deck surface. This will not only cause problems while you are riding it, but it could also lead to expensive repairs down the line.
  • It is important to use a dry cleaner or grease gun when cleaning your skateboard if you do want to keep it in good condition. If the board is wet when being cleaned, this may result in corrosion and more damage.
  • When washing your skateboard, make sure that the hot water heater is turning on at the right temperature – too cold of a temperature can freeze parts of the board and too hot of a temperature can actually warp boards.
  • Setting your shower valve properly is crucial for preventing flooding in your home or bathroom – making sure that there isn’t any kinking or obstruction in the hose will help prevent excess water from entering into areas where it shouldn’t be. Lastly, always wear safety goggles while taking care of skates and other sporting equipment.

Do you oil skateboard wheels?

If you skateboard, it is important to use a silicone-based lubricant on your wheels so they don’t get stuck and make noise. It’s also important to keep your bearings clean and dry – otherwise, the wheel will become slippery and noisy.

For dust and dirt, WD40 works great but be careful not to attract too much of it onto the bearing surface as this can damage them over time. Finally, if you’re looking for something that lasts longer than WD40, try Bones Speed Cream or Prolong from an automotive parts store.

How often should you change skateboard wheels?

Skateboard wheels are made of a variety of materials, and each type will wear down at a different rate. To make sure your skateboarding experience is as enjoyable as possible, it’s important to replace your wheels regularly.

It’s important to keep your skateboard wheels in good condition by regularly rotating them. This will help extend their lifespan and improve performance. You can rotate your wheels every 2 or 3 months for optimal use.

To Recap

Yes, you should clean your skateboard wheels. Dirt and dust can build up very quickly on a skateboard, creating dangerous conditions for both you and your board.

Cleaning the wheels will remove this dirt and debris, making the skating surface much safer for both you and your board.

Photo of author

Davis Torgerson

I am a professional skateboarder who has been involved in the skateboarding industry for over 10 years. I have had the opportunity to travel across the world and compete in various competitions. I live in New York City and work as a professional skateboarder. I also work as an assistant editor at a company called Skateboard Mag, where I contribute to articles about street skating, traveling, and other related topics. I have always been passionate about skateboarding and writing. I am currently working on my first book which will be published soon! LinkedIn

Leave a Comment