Does Direction Matter For Skateboard Wheel Bearings

Davis Torgerson

Updated on:

Does Direction Matter For Skateboard Wheel Bearings

When it comes to getting your truck in the ground, there’s no need for guesswork- just follow these simple steps. Orient the graphic side of your wheels towards the axle and center them on the hubs Put on new tires by aligning their centers with those on your trucks’ rims Make sure that each wheel is sitting squarely against its hub – this will ensure a smooth ride.

Does Direction Matter For Skateboard Wheel Bearings?

Setting your truck wheels correctly is necessary for a smooth ride, and can be done in a few simple steps. When orienting the graphic side of your tires, make sure they are facing down the road evenly.

Aligning the centers of the trucks will ensure that you have even pressure on all four corners when you put them on the ground. Finally, make sure to tighten all bolts before driving away.

Set Your Truck Wheels

You should set your truck wheel bearings in the correct direction to ensure proper performance and longevity of your wheels. Bearings can be easily rotated by a mechanic or you can do it yourself using a few simple steps.

For trucks with four-wheel drive, make sure the rear axle is lined up with the corresponding ball joint when rotating the bearings. If you have replaced one or more truck wheel bearings, it’s important to install them in their new location before reassembly of your vehicle.” It’s always a good idea to keep an eye on tire pressure as well; overinflated tires will cause bearing failure too.

Orient The Graphic Side Of Your Wheels

The graphic side of your skateboard wheel bearings should be oriented in the same direction as the axle on your board. If one bearing is not lining up correctly, it can cause wobbling and even loss of control while skating.

It’s important to get your bearings aligned so you can have a smooth ride and safe stunts. Bearings that are misaligned may need to be replaced altogether- don’t worry though, we’ve got instructions on how to do this yourself.

Be sure to orient the graphic side of your wheels before mounting them onto the deck – it could make all the difference when trying tricks for the first time.

Put On The Tires

Bearing installation is a critical step in the skateboard wheel assembly process, and it can be tricky to determine which way the bearing should spin when installed on your wheels.

The direction of rotation that you choose for your bearings will affect how smoothly your wheels turn and how long they will last. You can easily determine which way the bearing should spin by looking at one end of it and rotating it until it stops turning freely; then use this orientation on both ends of your new bearings to install them correctly on your skateboard wheels.

Bearings that are installed incorrectly may cause problems with gear grinding or even failure altogether, so take care when putting them on your skates. If you have questions about installing new bearings on your skateboard wheels, don’t hesitate to ask a trusted friend or professional skate technician for help – they know best.

Align The Centers Of the Trucks

Aligning the centers of the trucks can help ensure that your skateboard wheel bearings last longer. When adjusting the truck alignment, be sure to use a level and compass to make sure that each bearing is in center during installation.

If you notice any play or wobble in your bearings after adjustment, it may be time for a new set of trucks altogether. Be careful not to over-tighten screws as this could cause damage and even loss of Bearing Performance (BPM). Remember: It’s important to have accurate measurements before starting any DIY project.

Which way should my bearings face?

One of the most common problems with car bearings is that they are not faced in the correct direction. When this happens, it can cause all sorts of problems including premature wear and tear on the bearings themselves as well as noise and vibration from them.

The best way to check if your car’s bearings are facing the right way is to take it apart and examine each one closely. However, sometimes damage or misuse will mean that this isn’t possible. In these cases, you may need to have a specialist bearing service carried out on your car.

If both bearings are of the same color, they can face in any direction

Bearings should always be installed with their flat side facing outwards for optimal results. However, if one bearing is damaged or missing, it does not mean that all bearings must face in the same direction. Bearings can still be installed without affecting the other bearings.

Bearing replacement may require removal and re-installation of other components

If your vehicle has a bearing issue, it is often necessary to remove and replace other parts in order to fix the problem. This could include removing the engine cover and deck lid panel, as well as some suspension component.

Does it matter which way skateboard wheels face?

There is some debate about whether it matters which way skateboard wheels face when you’re skating. Some people believe that the direction in which the wheel faces affects how well it performs on the ground, while others say that this has no impact at all.

Ultimately, the choice is up to you and your style of skating.

  • Skateboard wheels face one way or the other when you’re skating, but it doesn’t really matter which way they are facing. Most skateboarders know their own personal method of wheel setting and that is specific to them. There is no “right” or “wrong” way to do it; as long as the shape of your graphic is the same on both sides, then you’re good to go.
  • Personalizing your graphics can make a big difference in how people perceive you and how well you’ll be able to stand out from other skaters. By keeping things simple, you give yourself more freedom to create whatever look you want without feeling restricted by someone else’s idea of what looks good.
  • The shape of skateboard wheels typically remain unchanged regardless of whether they are set up clockwise (CW) or counter-clockwise (CCW). However, there are many skaters who customize their graphic in one direction or another based on their own preferences and style. As long as the shapes match up between each side, it doesn’t really matter which direction they face.
  • It’s not unusual for different skaters have different methods for rotating their graphic around the deck – this is simply part of having custom graphics. Whether your Graphic faces lefty loosey (LOL), righty tighty (RTT), sideways nodding dogface (SNDDF), waffleboarding birdshitfuckin’ Eagleman you get the point: everybody does theirs a little differently.
  • Ultimately it comes down to personal preference – if something feels better for you then that’s ok. Just make sure whichever way your graphic faces matches up on both decks so everything flows together smoothly when skating.

Do bearings go on both sides of the wheel?

bearings can go bad on either side of the wheel. If one bearing goes bad, it can cause the wheel to wobble and eventually fail. To check if your bearings are going bad, you’ll need to remove the wheel from the car.

  • If you are having trouble with your bearings, it is a good idea to make sure that all of the parts on the wheel are in proper working order. You can check this by tightening all of the bolts and screws on the wheel. Additionally, you should check to see if any shields or covers have been damaged or lost.
  • Bearing assemblies usually come with two sets of bearing shells – one set for each side of the wheel hub assembly (or axle). When installing a new bearing, ensure that both sides receive a shell from the kit.
  • To install a bearing, first place it with its shield facing out so that it will fit into its housing properly when tightened down later on. Next, position it where you want it and mark its location using either scribes or drill bits before screwing everything together (use caution: high-powered tools can easily damage bearings.). Finally, put its shield back in place and tighten everything down.
  • Hanger” means “the piece at which an object hangs”; typically this refers to something like a door handle which attaches to a bracket attached to wall studs above/below; “shielded bearing” means one without these aforementioned features.
  • Toward Hanger) The shielded bearings pictured here have their shields placed towards the hanger – meaning they will be closer to where they will be mounted once installed onto your vehicle’s wheels NOTE: This orientation may vary depending on brand/model.

Can a wheel bearing be installed wrong?

If you have a wheel bearing failure, your CV axle, balljoint, or strut mount may also be at fault. Poor installation can lead to problems with the wheel bearing as well.

Make sure to consult a mechanic if you notice any of these signs of trouble. Keep an eye out for warning signs that indicate a potential problem and take action before it becomes too late.

To Recap

There is no definitive answer to whether direction matters for skateboard wheel bearings, as different skaters may prefer different bearing orientations.

Ultimately, it’s up to the skater to experiment and find what works best for them.

Photo of author

Davis Torgerson

I am a professional skateboarder who has been involved in the skateboarding industry for over 10 years. I have had the opportunity to travel across the world and compete in various competitions. I live in New York City and work as a professional skateboarder. I also work as an assistant editor at a company called Skateboard Mag, where I contribute to articles about street skating, traveling, and other related topics. I have always been passionate about skateboarding and writing. I am currently working on my first book which will be published soon! LinkedIn

Leave a Comment