A riser pad is a must-have if you have 58mm skateboard wheels. The wheel won’t fit correctly in the frame without one, and there’s vibration or stress cracks on your board as a result.
Shock pads are ineffective when it comes to reducing these issues, so get a riser pad to help with stability and shock absorption. If you don’t have one yet, make sure your board fits properly into the frame before buying any additional accessories like shocks or pads – otherwise you’ll be wasting your money.
Do I Need Riser Pad For 58 Mm Skateboard Wheels?
You need a riser pad for your 58mm skateboard wheels. The wheel doesn’t fit in the frame correctly and causes vibration or stress cracks on your board. Your shock pads aren’t enough to reducing these issues, you’ll need to upgrade them too.
A riser pad will solve this problem and make sure that your wheels are seated properly in the frame of your board. Pick up a riser pad from our store today, it’s essential for keeping your ride safe and free from trouble.
Do you need riser pads on your skateboard?
Riser pads are not necessary for skateboards using wheels smaller than 55mm, but they can help keep the hardware in place if your board has small wheels.
Risers can also help to prevent vibrations from the hardware on a skateboard that uses smaller-than-normal wheels. To find out if risers are needed for your specific skateboard, measure the width of the deck’s trucks and compare it to the size listed on our website .
If you do need risers, be sure to order them from our website as they’re not typically available at retail stores . Keep in mind that even 1/8″ risers can make a big difference when skating.
Do you need riser pads for 56mm?
If you have 56mm wheels and want to keep them from biting into your deck, get riser pads. Shock pads can also help if your truck’s wheels are 57mm or bigger.
Make sure the shock pads you choose fit your trucks snugly; they should go between the wheel and deck to prevent damage. Be aware that if you ride your trucks very loose they may come in contact with the shock pad – this is why it’s important to have a tight fit when choosing them.
Finally, make sure you measure your trucks before buying – so that you don’t end up spending more money on something unnecessary
What size risers do I need for 56mm wheels?
Risers can help to prevent wheel bite, so we recommend using them when you have a 56mm to 60mm size wheel. You can use 7/8″ (flush fit) or 1″ (a little extra) hardware for most setups, but we recommend using 1 1/8″ hardware when using 1/8″ risers.
Wheelbite is an issue that can be avoided by using the right riser height and hardware combination.
What size riser pads should I get?
Get a riser pad that is the same size as your deck width to ensure stability and an even ride. If you have a wider board, get a pad that is twice the width of your deck; if you have a narrower board, get only the 1/8″ or 3/16″ pads needed.
Some riders use risers in between their feet to raise them up higher off the ground for more control while others set them on top of their trucks so they can stay seated without having to adjust their stance each time they hit a bump or drop in height.
Experiment with different sizes and types until you find one that works best for you – just make sure it’s big enough. You may also want to consider adding shock cord loops around your deck to hold your pad in place if there are any bumps or drops along the way – this will help keep everything nice and stable during those hard rides.
Do you need risers for 55mm wheels?
If you have a 55mm or larger skateboard wheel, risers are recommended for stability and protection against vibration and stress cracks. Shock pads can also be used to reduce vibration, but they’re not necessary with smaller wheels if the board is mounted properly on your truck/wheels.
Some trucks come pre-routed with shock pads already installed; check the specs before purchasing your set up to make sure. Risers will increase the overall height of your deck by 1″, so keep that in mind when selecting a setup that fits your needs and style of skatingboarding. Wheel size is important to consider when shopping for risers as well – choose something that’s compatible with your specific skateboard deck size
Do Pro skaters use riser pads?
Riser pads are small pads that fit between the trucks and the skateboard’s deck, and they serve some purposes for pro skaters. Street skating can be more dangerous without them because it involves more contact with the ground.
They can also help to reduce the risk of injury in other ways, such as by helping keep you stable while you’re performing tricks or jumps. For many pros, riser pads are an essential part of their skateboarding arsenal; without them, they would likely have a harder time competing on the street circuit.
If you’re thinking about picking up a skateboard and want to improve your skills quickly, consider investing in a set of risers
What size wheels does Tony Hawk Ride?
The 53-56mm wheel size is common for beginner or bigger skaters skating on streets, skate parks, bowls and vert ramps. Buying a set of wheels that are too small can cause you to have difficulty controlling the board and may even result in injury.
Don’t forget to measure your skateboard’s width, height and length before making your purchase so that you get the right size wheels. As with most things related to skating, it’s always best to go with a trusted brand name if possible; this will ensure quality products and durability over time.
If you’re not sure what size wheels will work best for you, consult an expert or check out some helpful online resources such as SkateOneOnline or Boardlistr
Frequently Asked Questions
Do riser pads prevent pressure cracks?
Lift your skateboard deck up. This will give you more room for a larger wheel diameter with less risk of contact between the wheel and deck.
What do angled riser pads do?
The angle of your truck’s baseplate can be controlled by using angled riser pads.
What size trucks should I get for a 8.0 deck?
To get the perfect truck size for your needs, match the overall truck width to the deck width.
What size skateboard bolts do I need?
Choose the right skateboard bolt size based on your setup and skateboarding style.
Do all skateboard wheels fit all trucks?
Check the dimensions of your skateboard truck and deck. Make sure they fit correctly before ordering any parts.
Do Longboard trucks need risers?
Your board needs a riser if it uses wheels smaller then 55mm.
Is it easier to Ollie with smaller wheels?
There are two types of wheels- small and large. Smaller wheels have more speed but take longer to complete the motion. If you want to ollie larger stairs, then use a large wheel.
What size wheels do pro skaters use?
Skate with a large wheel. 58-62mm wheels are the most common size on the market and will help you get around faster and easier on your favorite ramps, bowls, and other surfaces.
To Recap
A risers pad is not necessary for 58 mm skateboard wheels, but it may help protect your flooring from scratches and dents. If you do decide to use a risers pad, be sure to measure the width of your board first so that you buy the correct size.
