How To Replace Putter Grip?

Putting a new grip on your putter can make a world of difference when it comes to improving your stroke. Here are four tips on how to replace your putter grip.

Source: golf

How To Replace Putter Grip

Putting putter grip on a golf club can make it easier to hold the club and improve your accuracy. However, if the grip becomes dirty or lose its adhesiveness, it needs to be replaced.

Usually, removing the putter grip is just as easy as installing a new one – all you need is some patience and a few tools. After you have removed the old grip, clean it thoroughly with soap and water before lubricating it with a golf-specific lubricant.

Finally, replace the grip by reinserting it into the grooves on the club’s shaft and tightening it with screws or bolts.

Remove Putter Grip

If your putter grip is feeling weak, you can replace it with a new one fairly easily. You don’t need any special tools or expertise to do this, and the process will only take a few minutes. But removing the putter grip without damage is tricky.

Follow these simple steps to remove your old putter grip: Remove the club head by unscrewing the headcover and then pulling it off of the club body. Once the headcover is removed, use a flathead screwdriver to pry off the rubber grip seal from around the shaft of the club (see image).

Carefully peel back the rubber grip until it snaps in two (see image). Replace the new grip by slipping it over the shaft of the club and re-applying the seal around it with a rubber mallet, being careful not to deform or puncture the new grip (see image). Put everything back together by screwing in place the headcover, rubber grip seal, and club body.

Clean And Lube Grip

When it comes to putting, most of us rely on our putter grip for accuracy and consistency. But over time, dirt and grit can build up on the grip, making it difficult to hold onto the club.

To clean your grip and restore its lubrication, follow these simple steps: Remove any excess dirt or grass with a vacuum cleaner or cloth dampened in mild soap. Dry the grip thoroughly before applying a light coat of synthetic lubricant such as WD-or graphite oil.* Let the grip dry completely before using it again.

If you notice that your grip is becoming slippery, apply a second coat of lubricant as needed to avoid losing your stroke. For extra protection against moisture and rust, coat the inside of the grip with a silicone sealant like Gorilla Glue before re-gripping.

Keep your grips well-oiled and free from debris to keep them performing their best!* Follow these tips to keep your putter grip in top shape – they’ll make putting that much easier!

Install New Grip

Putting back the original grip on your putter can make a big difference in your game. The old grip may have lost its friction over time, causing you to miss shots. Replacing the grip is an easy task that can improve your putting experience immediately.

You’ll need a putter grip replacement tool and some replacement grips. Once you have all the supplies, follow these simple steps for installing a new grip: Make sure the putter is clean and free of debris before beginning the installation process. Locate the existing insert on the grip and remove it with the replacement tool.

Cut a piece of new grip to fit snugly into the hole left by the insert removal and replace it on top of the putter handle. Apply pressure to ensure a good seal between the grip and handle, then screw on the cap to secure it in place. Test out your new grip by putting some balls into practice!

Tools Required

When it comes to putting, there are a few different grips that you can use to improve your consistency and accuracy. The three main types of putter grips are the traditional grip, the over-the-top grip, and the wrap-around grip.

You can find these grips in most golf stores and online retailers. Try out each grip for a while before making a final decision on which one is best for you. Once you find the right grip, be sure to practice using it regularly so that you get better results on the green.

How To Disassemble The Putter Grip

When it comes to putting, most people use the same grip regardless of the club they are using. This can lead to a lot of pain and inflammation over time, especially if you don’t take proper care of your putter grip.

To relieve these symptoms and improve your golf game, it is important to disassemble and replace your putter grip regularly. There are a few different methods that you can use to do this without any tools required. By following these simple steps, you will be able to keep your putter grip in top condition and enjoy improved performance on the green.

How To Assemble The Putter Grip

Putting the putter grip back together is a simple task that can be completed in just a few minutes. All you need is a Phillips head screwdriver and some of the provided screws.

First, remove the two screws that hold the grip to the clubface. Next, use the screwdriver to remove the old grip from the clubface. Place the new grip on top of the old one and replace both screws.

Make sure that everything is secure by tightening down the screws on either side of the grip.

How To Check For Loose Parts

Checking for loose parts on your putter grip is an important step in maintaining your golf club. This includes making sure the screws are tight and all of the adjustments are in place.

When testing your putter grip, you should also press down on the club head to ensure it’s secure. If there are any loose or missing parts, they can cause problems with your putting stroke.

By checking for loose parts and correcting them as needed, you can extend the life of your golf club and improve your game.

How To Tighten Parts

Replacing the putter grip on your club can make a big difference when it comes to your game. By tightening the grip, you can improve your control and accuracy on the green.

The putter grip is a small piece of equipment that attaches to the club handle. It has two parts: a spring clip and a screw-on cap. To tighten or loosen the grip, simply turn the screw-on cap counterclockwise or clockwise.

Be careful not to overtighten the screws as they could strip out or break. If you experience any problems with your grip, be sure to take it to an authorized dealer for repairs or replacements. For replacement grips, be sure to find one that fits your club perfectly and gives you improved performance on the green.


Replacing a putter grip on a golf club can be a relatively easy and affordable fix. Some of the most common putter grips that need to be replaced are the ones that use rubber or sponge inserts.

When it comes to replacing a putter grip, it is important to make sure that you get the right one for your specific club. Finally, always remember to torque the screws down sufficiently so that they do not come loose during use.

Similar Posts:

How To Clean Leather Golf Grips?

If your golf grips are dirty and stained, you’ll need to clean them. Here’s how: 1) Pour a small amount of mild soap into a bowl or cup.

How To Add Length To Golf Clubs?

Adding length to golf clubs is a very simple process that can have a great impact on your game. By increasing the club’s loft, you’ll increase the distance it will travel and improve your accuracy.

How To Remove A Graphite Golf Shaft?

If you’re having trouble removing a golf shaft from the ball, try using boiling water. Boil some water and pour it over the golf shaft.

How To Tell If Golf Pride Grips Are Fake?

Golf Pride Grips are a well-known brand of golf club grips and they are often considered to be one of the best around. However, it’s important to be aware that not all Golf Pride Grips are legitimate.

How To Clean Footjoy Flex Golf Shoes?

Footjoy Flex Golf Shoes are designed to provide a comfortable and durable golfing experience. However, like any other piece of equipment, they can be dirty and need to be cleaned on a regular basis.

How To Clean Driver Head?

If you own a driver head and are looking to clean it, there are a few things that you should remember. First, make sure that the head is completely dry before attempting to clean it.

Leave a Comment

Your email address will not be published. Required fields are marked *