How To Refurbish A Putter?

Putting new life into an old golf club can be a fun and rewarding project. By following a few simple steps, you can refurbish your putter to make it new again. Begin by cleaning the club thoroughly with mild soap and water.

If the putter has any built-up dust or grime, remove it using a vacuum cleaner or brush. Next, use a light coat of paint or varnish to seal the club’s finish and prevent future wear and tear. Finally, add some personal touches to make your putter look its best! You could add a personalized sticker, frame it, or even engrave it with your name.

How To Refurbish A Putter

Putting new life into an old putter is not as difficult as one might think. All that is required to refurbish a putter is to remove the head and clean and lubricate the grooves.

Next, install a new head and replace the shaft. Finally, adjust the weight so that you have the perfect balance between power and accuracy. You can do all of this yourself or enlist the help of a professional if you prefer.

Putting new life into an old golf club can be fun and rewarding, no matter how simple the task may seem at first glance.

Remove Putter Head

When it comes to repairing or refinishing a putter, there are some simple steps that you can take to achieve the desired look and feel. The most important part of the process is preparation, so be sure to clean your putter thoroughly before beginning any work.

Once the putter is cleaned, sand down any rough areas with -grit sandpaper. Apply a coat of primer to all surfaces of the putter head and allow it to dry completely. Next, paint your desired color over the primer with a brush or roller.

Finish up by applying a topcoat if desired and let the paint dry completely before using your new putter! If you want more of a customized look, you can also add decals or patches to your putter head using a heat gun or stovetop method.

Don’t forget about puttingters shafts and grips! They can also benefit from a quick refurbishment by sanding down any rough edges and painting them in your favorite color(s).

Finally, give your putter handle a good grip treatment by filling in any cracks or weak spots with wood filler and then sanding smooth again. And there you have it – an easy way to get your old golf club looking brand new again!

Clean And Lubricate Grooves

Cleaning and lubricating grooves on a putter can help it shoot straighter. Make sure to clean the grooves in the metal using a mild soap and water solution. Apply a light coat of graphite lubricant to each groove, re-gripping the club after every few shots.

Shooting straighter is essential for putting, so be sure to clean and lubricate your putter’s grooves regularly!

Install New Head

Whether you’ve never putted before or you’re an experienced player, refurbishing your putter can be a fun and rewarding experience. There are a few important steps to follow when refurbishing your putter, so that it looks and performs like new again.

Be sure to clean the shaft, face, and grip thoroughly before beginning any repairs or updates. Use a quality wood glue and clamp to securely hold the parts together while they dry. After the glue has dried, sand the repair areas smooth with fine-grit sandpaper or a dremel tool.

Finally, apply a high-quality finish of your choice to the repaired area. Restore faded or chipped paint with a commercial restoration product such as All-Clad’s Paint Restorer If you want additional protection against weathering and fading, then lacquer may be the perfect finish for you!.

Keep in mind that is not only beneficial from an aesthetic standpoint; it also improves your game by restoring lost motion and consistency in your stroke.

Replace Shaft

There are a few simple steps to follow when refurbishing your putter shaft – from cleaning and lubricating to replacing parts. Replacing the shaft on your golf club can make a big difference in your game, so be sure to do it right the first time! If you’re not familiar with how to replace a shaft on your putter, take some time to watch a video or read an article online before starting.

Assemble all of the necessary tools before beginning – including a putter grip tape measure and putter head wrench. Clean off any old residue or oil using a degreaser, then let it dry completely before proceeding. Lubricate the new shaft using an appropriate grease or silicone-based product – avoid using WD-because it will damage the clubhead finish.

Align the shaft correctly in the hole on the putter head by tightening the head wrench until it feels snug – don’t over-tighten! Replace the old shaft with the new one by reversing these steps – making sure you tighten everything securely before doing so!

Adjust Weight

For golfers who are looking to refurbish their putters, there are a few simple adjustments that can be made. Adjusting the weight of your putter is one way to make it feel different in your hands from start to finish.

There are three basic ways to adjust the weight of your putter: by adding or removing material, changing the shape, or altering the balance point. Each adjustment will change how your putter feels and performs in various situations on the green.

Experiment with different weights and balances until you find what works best for you on the green. Once you have found an ideal weight and balance for your putter, keep it in place by using a grip tape or strap. Refinishing your putter can give it a new lease on life and help you improve your game on the greens!

Understanding The Parts Of A Putter

A putter is made up of different parts that need to be taken care of in order to keep it in good condition. By understanding the parts of a putter, you can take better care of it and make it last longer. You’ll be able to remove rust from the parts easily.

The head is the part of the putter that hits the ball and is where the clubface meets the shaft. The face is where the player puts their hands and makes contact with the ball. The heel or soleplate helps support the weight of the club and provides traction on the ground when striking the ball.

To keep your putter in good condition, you should clean it regularly using a mild soap and water solution. If your putter starts to show signs of wear or damage, you should replace it with a new one instead of trying to fix it yourself. When storing your putter, make sure that it is stored upright so that gravity can help keep it in good condition.

You can also protect your club by wrapping it in soft cloth before storage to limit scratches and dents from occurring. Finally, remember to take care of your Putting Alley–the space where you practice putting–by cleaning it regularly and keeping debris at a minimum?

Golf Ball Repair

If your golf ball is not performing the way it should, there are a few ways to remedy the situation. One of the most common issues with golf balls is that they lose their air pressure over time.

This can cause your ball to go too far or not go at all on shots. To fix this issue, you can either inflate your golf ball using a pump or use a deflation kit. If you don’t have access to either of these methods, then you can try using water or sand as an alternative solution.

In addition to repairing your golf ball, keeping it in good condition will also help ensure that it performs well for longer periods of time. By taking some simple steps and following some guidelines, you can refurbish your old golf ball and make it work again like new!


There are several ways to refurbish a putter- including replacing the grip, face, and mallet. The most important factor when refurbishing a putter is to keep it in good condition so that it can be used for years to come.

It is also important to replace any broken parts so that the putter functions properly. Finally, any refinishing or repairs should be done by a professional who understands the correct techniques and materials.

Similar Posts:

How To Add Length To Golf Clubs?

Adding length to golf clubs is a very simple process that can have a great impact on your game. By increasing the club’s loft, you’ll increase the distance it will travel and improve your accuracy.

How To Cut Down A Golf Club Shaft?

If you have a golf club shaft that’s too long, or if you want to shorten it, here are the steps: 1. Remove the club head.

How To Remove A Graphite Golf Shaft?

If you’re having trouble removing a golf shaft from the ball, try using boiling water. Boil some water and pour it over the golf shaft.

How To Clean Leather Golf Grips?

If your golf grips are dirty and stained, you’ll need to clean them. Here’s how: 1) Pour a small amount of mild soap into a bowl or cup.

What Is Pureing A Golf Shaft?

Pureing a golf shaft is an essential step in restoring its performance. By removing impurities and debris, you will allow the shaft to glide through the air with more accuracy and less resistance.

How To Clean Driver Head?

If you own a driver head and are looking to clean it, there are a few things that you should remember. First, make sure that the head is completely dry before attempting to clean it.

Leave a Comment

Your email address will not be published. Required fields are marked *