How To Extend A Putter Shaft?

If you’re having trouble with your putter’s shaft bending or snapping, there are a few things that you can do to extend it. The most common solution is to use a golf ball gripper, but there are other options available as well.

If the shaft is severely bent or snapped, you may need to replace it entirely.

Source: Mikesgolfoutlet

How To Extend A Putter Shaft

If you have a putter that is not fitting your stroke, there are a few ways to fix it. You can purchase a putter extension, install a NPT adapter on the end of the putter shaft, thread the extension onto the putter shaft, center the extension on the ball and tighten grip, or adjust your stance.

Purchase A Putter Extension

If you’re looking to extend your putter shaft, there are a few options available. You can purchase a putter extension sleeve, which is a piece of plastic that fits over the end of your putter shaft. Alternatively, you can buy an adjustable putter extension, which lets you lengthen or shorten the length of the shaft.

It Helps You Make Better Contact With The Ball

Putting is all about making good contact with the ball. When you purchase a putter extension, it helps you make better contact with the ball, which will result in better putting.

It Increases Your Stroke Speed

Having a longer putter shaft increases your stroke speed, which makes it easier to make consistent contact with the ball and improve your putting skills.

You Can Swing The Club More freely

Having a longer putter shaft also allows you to swing the club more freely, which will help you hit the ball farther and straighter.

It Makes Putting More Fun and Rewarding

When you have a longer putter shaft, it makes putting more fun and rewarding because you can hit the ball further and straighter than ever before.

Install A 1/4″ Npt Adapter On The End Of The Putter Shaft

If you’re having trouble extending your putter shaft, you may need to install a 1/4″ NPT adapter on the end of the shaft. This adapter will allow you to thread a hose onto the shaft and use an air compressor to extend it.

Problem: My Putter Shaft Won’t Extend

If your putter shaft won’t extend, there may be a problem with the 1/4″ NPT adapter that you installed on the end of the shaft. This adapter allows you to connect the shaft to your clubhead. If this adapter is not working properly, it may cause your putter shaft to not extend.

Solution: Fix or Replace the Adapter

If the 1/4″ NPT adapter is not working properly, you can fix it by replacing it or fixing it so that it works properly. If this is not an option, then you can simply extend the shaft by adding a longer piece of metal to the end of it.

Warning: Make sure that the extension is securely attached!

Make sure that the extension is securely attached to your putter before playing golf. If it falls off during play, it could lead to a number of problems including loss of points and potential injury.

Thread The Extension Onto The Putter Shaft

If your putter shaft is getting tired, you can extend it by threading the extension onto the putter shaft. This will give you more length and flexibility when putting.

Make Sure the Extension is Correctly Threaded

Make sure that the extension is properly threaded onto the putter shaft. There are a few different types of extensions, so be sure to choose the right one for your putter. Some extensions have a screw on the end, while others use a bolt and nut.

Tighten the Nut on the Extension

Once you have determined which type of extension you need, tighten the nut on it using a wrench or pliers. This will ensure that the extension stays tight on the putter shaft and doesn’t move around during use.

Slide the Extension onto the Putter Shaft

Now that the extension is attached to the putter shaft, slide it onto it until it clicks into place. Be sure to evenly distribute pressure when sliding it on so that it won’t loosen up over time.

Check for Fitment Issues

If there are any fitment issues with the extension, make sure to address them before continuing. If there are any gaps or spots where it doesn’t fit properly, you may need to file down or replace the extension altogether.

Test Your New Extension

Once everything isfitted correctly, test out your new extension by hitting balls with your putter. If everything feels good and installation was successful, you can now start practicing!

Center The Extension On The Ball And Tighten Grip

When you’re putting, it’s important to have good contact with the ball. That means centering the extension on the ball and tightening your grip. This will help increase your accuracy and power.

  • Center the extension on the ball and tighten grip to ensure proper alignment.
  • The putter shaft should be aligned with the center of the ball when you are tightening your grip.
  • To extend the putter shaft, squeeze the grip handle until it is tight and then slowly release it.
  • Be sure to keep your hand close to the butt end of the grip for stability while extending the shaft.
  • Once you have extended the shaft as far as you want, tighten your grip again and check that it is properly aligned with the ball

Play Golf

To extend your putter shaft, follow these simple steps: Loosen the grip screw on the club handle and unscrew the grip. Remove the old grip by peeling it off with your hands or a putter claw.

If you have a wooden shaft, coat it with some white lithium soap before installing the new grip. Apply pressure to the grips while lining them up in their slots on the club head and screw them in place using a wrench or pliers.

Replace any screws that may have come loose during installation and test your putter for balance and feel by hitting several balls.

Materials You’Ll Need

Replacing a putter shaft is not difficult, but it does require some materials that you may have lying around the house. The most common material used for puttingter shaft replacements is metal.

Other materials that can be used include wood, plastic, or even fiberglass. The type of material you use will depend on the design of your putter and how sturdy you want it to be. You’ll also need a drill, screws, and an Allen wrench.

Once you have all the necessary materials, follow these steps to replace your putter shaft: Drill a hole in the bottom of the old shaft where the new one will go Screw the new shaft into the hole in the bottom of the old one Wrap some plumbers tape around the threads on both pieces so they don’t come loose during use Have fun hitting balls again!

Tools Required

If you want to extend the putter shaft on your golf club, there are a few tools that you will need. A hacksaw is needed to cut the old shaft off of the club head and then make a new extension.

You can also use a drill and some wood screws to make the extension. Make sure that the area where you’re making the extension is clean and dry before starting because water could damage your work surface.

The finished extension should have a snug fit on the club head so it doesn’t wobble or move while you hit the ball. To test if the extension is in place properly, try hitting a ball with it attached to see if it moves or swings freely from side to side.

If everything looks okay, then you can finish up by applying a sealant or paint to protect your new shaft from weathering and oxidation over time.

To Recap

Extending a putter shaft can help increase your accuracy when playing the game of golf. There are a few different methods that you can use to extend your shaft, and it is important to choose the one that will work best for you.

If you don’t have any tools or know how to do this yourself, then it might be worth hiring someone to do the job for you.

Similar Posts:

How To Add Length To Golf Clubs?

Adding length to golf clubs is a very simple process that can have a great impact on your game. By increasing the club’s loft, you’ll increase the distance it will travel and improve your accuracy.

How To Remove A Graphite Golf Shaft?

If you’re having trouble removing a golf shaft from the ball, try using boiling water. Boil some water and pour it over the golf shaft.

How To Cut Down A Golf Club Shaft?

If you have a golf club shaft that’s too long, or if you want to shorten it, here are the steps: 1. Remove the club head.

What Is Pureing A Golf Shaft?

Pureing a golf shaft is an essential step in restoring its performance. By removing impurities and debris, you will allow the shaft to glide through the air with more accuracy and less resistance.

Ping Vault Vs Scotty Cameron Putters

There are two main types of putters on the market – those that use a wooden shaft and those that use a metal shaft. The metal-shafted putters, such as the Scotty Cameron Putter, tend to be more forgiving than the wooden-shafted putters, such as the Ping Vault Putter.

How To Clean Leather Golf Grips?

If your golf grips are dirty and stained, you’ll need to clean them. Here’s how: 1) Pour a small amount of mild soap into a bowl or cup.

Leave a Comment

Your email address will not be published. Required fields are marked *