Can You Extend A Putter Shaft?

There are a few things that you can do to extend the life of your putter shaft. One is to keep it clean by rinsing it off after every use and wiping down the head with a cloth or brush.

Another is to store it in a cool, dry place. And lastly, if your club feels like its losing length quickly, you may need to replace the rubber grip on the shaft.

Source: youtube

Can You Extend A Putter Shaft

If you own a putter and find that your shaft is getting in the way when you are trying to make a stroke, there is a solution! You can purchase an extension rod and drill a hole in the shaft.

Then, insert the extension rod and tighten the nut on the end of the extension rod. This will give you enough extra length to swing freely without having to crane your neck or reach behind your back.

Purchase An Extension Rod

If you’re looking to extend your putter shaft, you can purchase an extension rod. This will allow you to hit the ball further and straighter. Choose a quality rod that is made from strong materials and avoid cheap options that could break easily.

Difficulty Puttingtting The Ball In The Green

If you are having difficulty putting the ball in the hole, it may be because your putter shaft is too short. This issue can be corrected by purchasing an extension rod. Extension rods make it easier to hit the ball straight and farther down the golf course.

Cannot Hit A Straight Shot

If your putter shaft is not long enough, it will be difficult to hit a straight shot. This problem can be corrected by purchasing an extension rod. An extension rod will help you hit the ball straighter and further down the golf course.

Unable To Drive It Longer Than 50 Yards

If your putter shaft is not long enough, you may not be able to drive it further than 50 yards. This problem can be corrected by purchasing an extension rod. An extension rod will help you hit the ball straighter and further down the golf course.

Poor Performance On Short Holes

If you are having trouble hitting shots on shorter holes, it may be because your putter shaft is not long enough. This issue can be corrected by purchasing an extension rod. An extension rod makes it easier to hit shots from longer distances and improves performance on shorter holes as well.

Cannot Hit Shots Over 30 Yards

If your putter shaft is not long enough, you may not be able to hit shots over 30 yards from the green. This problem can be corrected by purchasing an extension rod. An extension rod makes it easier to hit shots from longer distances and improves performance on shorter holes as well.

Source: golf

Drill A Hole In The Putter Shaft

If you want to extend the shaft on your putter, drilling a hole in the clubhead is an easy and effective way to do it. All you need is a drill bit that is slightly smaller than the original shaft’s diameter, and some wood glue.

Glue the new hole to the bottom of the old shaft, then screw it on with a screwdriver. Be sure to tighten the screws until they are snug; otherwise, the putter will not move smoothly through the stroke. This DIY project can be done in minutes, and it will make your putter more playable and durable.

Insert The Extension Rod

If you can’t extend the putter shaft on your golf club, you may need to replace the extension rod. This is a metal rod that connects the putter shaft to the head of the club. It can become damaged over time, preventing you from putting the club into the correct position.

Cannot Extend Putter Shaft

If the putter shaft cannot be extended, it may be because of a broken or missing extension rod. A broken or missing extension rod can prevent the shaft from being extended. If the putter shaft cannot be extended by hand, it may need to be replaced with a new one.

Cannot Move Putter Shaft

If the putter shaft cannot be moved, it may be because the ball has become lodged inside of it. This can happen if the ball is not properly lubricated and it gets stuck in between the moving parts of the putter shaft. To free up the ball, you will need to use a small Torx tool and remove it using gentle pressure.

Ball Is Not Lubricated Properly

A poorly lubricated ball will cause problems with your putter shaft. If you notice that your ball isn’t sliding smoothly on the surface of the shaft, you should apply more lubricant to it before playing again. You can also try cleaning out any gunk or debris that may have built up on the inside of your putter shaft over time.

Broken Extension Rod

If your extension rod is broken, it will not allow you to extend your putter’s shaft completely. In this case, you will need to replace both the extension rod and putter shaft together.

Tighten The Nut On The End Of The Extension Rod

If you can’t extend your putter shaft, you may need to tighten the nut on the end of the extension rod. This will help ensure that the shaft is stable and doesn’t wobble when you hit the ball.

  • You can tighten the nut on the end of the extension rod by hand to extend the shaft.
  • If you are having trouble tightening the nut, you may need a hex wrench or a socket wrench.
  • You can also use an extension rod tensioner to help keep the shaft in place.
  • If you have trouble extending or tightening the rod, it may be because of worn or damaged parts. You can replace the rod if necessary.
  • Make sure that you use a Torx T-screwdriver for this job, as it will fit most screws on the end of an extension rod

Tools You’Ll Need

If you’re having trouble extending your putter shaft, you’ll need a wrench and some pliers. First, loosen the nut on the end of the shaft by turning it counter-clockwise with the wrench. Next, use the pliers to pull the shaft out until it’s just about extended. Tighten the nut back down and you’re done!

  • You’ll need a putter shaft extension to do the job.
  • There are a few different types of putter shaft extensions available on the market, so make sure you get the right one for your needs.
  • The most common type of extension is the universal joint extension, which can be used with most putters.
  • Another option is the ball-and-socket joint extension, which is better suited for putting green balls into holes.
  • Finally, there is the T-joint extension, which is best suited for stroke players who want to use their entire arm while they’re putting.

Parts Of A Putter Shaft

When putting the putter shaft back together, it is important to pay attention to the following parts: The hosel – this part attaches to the club head and determines the loft or how high your ball will travel The grip – this is where your hand rests when you are holding the club The heel – this part of the club is at a lower angle than the toe and connects to the sole of the club The mallet – this is what you use to hit the ball

How To Extend A Putter Shaft

If you’re having trouble extending your putter shaft, there are a few things you can do to try and fix the issue. First, make sure that the putter is properly tightened onto the club. Next, check to see if there’s any debris or obstruction in the shaft. Finally, try using a different grip on the club to see if that fixes the problem.

Remove Putter From Golf Club

Remove the putter from your golf club and unscrew it from the shaft. You will then need to remove the detent screws on each side of the shaft. Once these screws are removed, you can pull the shaft out of the putter head.

Cut Off The Old Shaft

Measure the length of shaft that you need to replace and cut off a new piece of shaft with this measurement in mind. Make sure that you have enough extra material so that you can screw it back onto the head later.

Install New Shaft Into Head

Push the new shaft into the head until it is seated properly and screw it into place using the detent screws. Be sure to tighten these screws down firmly once they are in place.

Replace Detent Screws

Replace the detents screws on either side of the head and reattach your putter to your golf club.

To Recap

Extending a putter shaft is a relatively easy task that can help improve your putting performance. You will need a few supplies and some simple DIY instructions, so be sure to read through the guide before getting started.

If you follow the instructions carefully, extending your putter shaft should not be too difficult.

Similar Posts:

How To Remove A Graphite Golf Shaft?

If you’re having trouble removing a golf shaft from the ball, try using boiling water. Boil some water and pour it over the golf shaft.

How To Cut Down A Golf Club Shaft?

If you have a golf club shaft that’s too long, or if you want to shorten it, here are the steps:

1. Remove the club head.

How To Add Length To Golf Clubs?

Adding length to golf clubs is a very simple process that can have a great impact on your game. By increasing the club’s loft, you’ll increase the distance it will travel and improve your accuracy.

Ping Vault Vs Scotty Cameron Putters

There are two main types of putters on the market – those that use a wooden shaft and those that use a metal shaft. The metal-shafted putters, such as the Scotty Cameron Putter, tend to be more forgiving than the wooden-shafted putters, such as the Ping Vault Putter.

What Is Pureing A Golf Shaft?

Pureing a golf shaft is an essential step in restoring its performance. By removing impurities and debris, you will allow the shaft to glide through the air with more accuracy and less resistance.

Lamkin Ebl 3Gen Pistol Putter Grip

Lamkin Ebl en Pistol Putter Grip is designed to provide a better grip and feel when putting. It also has a softer, more forgiving material that minimizes hand fatigue.

Leave a Comment

Your email address will not be published.